Shop for cabinet hardware

Reviews 1
Average Rating 5

Helpful Votes 100.00 %
First Review 9/9/2008
Last Review 9/9/2008

Quality
Setup
Value

Beautiful, can’t complain. Good amount of room for my fairly large hand to grab. I even put one on my trash compactor and it it holding up to the stress very well. Comes with short and long screws, but you may still have to cut them to length using a pair of wire-strippers (with screw cutters).
It is true that there is no template. I used Long-Mask (painter blue masking tape) to cover the corner of the cabinet and then used a caliper to mark the masking tape. Then a spring-loaded center punch to mark the center of the holes, and pre-drilled my holes and removed the tape. This method left a visually perfect install with ~0.010" Error max on hole placement. This method should work fine for any style. A template would have been a little quicker, but I am cheap and have the tools. If you don't have a capliper get a 6" Stainless Steel one for as little as ~$14 + S&H from use-enco dot com, I prefer the 12" one that will cost you $28.

1 of 1 people found this review helpful